Tank Blanketing
Gas Blanket Controller
OUR EXPERTISE
Maximized control with minimized spend.
With increasing gas prices and stronger environmental regulations, the need for our Accu-Set Gas Blanket Controller is a must. If you have storage tanks with a sealed vapor system, consider using an Accu-Set Gas Blanket Control system to minimize your operating cost and maximize your safety factor.
Save costs by switching your old and out of control systems to Prism. Old, misapplied, jimmy rigged gas blanket regulators may be dumping your profit through the tank and out to the flare stack to be burnt. Many systems running today are dumping thousands of dollars’ worth of blanket gas right through the system and out to the stacks. Those systems can be evaluated by a trained Prism service person, who will give a written proposal and cost to upgrade your systems to eliminate the profit drain.
Why Gas Blanket Controllers?
The Accu-Set Controller is a large diameter, Teflon, high accuracy diaphragm that reacts to tank pressure at very minimal pressures such as ¼” water column. This high accuracy dependable Teflon diaphragm and micro valve operate in changing temperatures with consistent repeatability.
The Accu-Set Controller allows users to reduce tank pressures to a minimum to reduce a potential gas release. The lower the tank pressure the less likely are fugitive emissions. The Accu-Set assures that the tanks positive pressure is maintained at 1/4″ water column and does not allow air to enter the tank. Air inflow into the tanks creates accelerated corrosion and deterioration to tanks and piping systems, as well as the potential for explosions in flare vapor recovery lines.
Prism Gas Blanket Controller
Patented technology for Accuracy & Repeatability.
Accu-Set Gas Blanket Control :
Accu-Set Features:
